Experimental study on dimensional variations of 3D printed dental models based on printing orientation

Clin Case Rep. 2024 Mar 5;12(3):e8630. doi: 10.1002/ccr3.8630. eCollection 2024 Mar.

Abstract

This research investigates the trueness and precision of 3D printing technology in dental applications, specifically focusing on dimensional variations observed in models printed at different angles. The methodology involved importing a dental model into slicing software, adjusting its orientation, and implementing support structures for stability. Subsequently, the model underwent 3D printing five times for each orientation using appropriate equipment and underwent post-processing steps, including cleaning, washing, and UV-light post-curing. The printed models were then scanned using a specialized desktop scanner for further analysis. Accuracy assessment was carried out using dedicated software, employing an algorithm for precise alignment by comparing the scanned files. Color deviation maps were utilized to visually represent variations, aiming to evaluate how positioning during printing influences the trueness and precision of 3D-printed dental models. Trueness and precision analyses involved the Shapiro-Wilk test for normality and a one-way ANOVA to compare means of three independent groups, with statistical analyses conducted using IBM SPSS Statistics software. The color maps derived from 3D comparisons revealed positive and negative deviations, represented by distinct colors. Comparative results indicated that models positioned at 0° exhibited the least dimensional deviation, whereas those at 90° showed the highest. Regarding precision, models printed at 0° demonstrated the highest reproducibility, while those at 15° exhibited the lowest. Based on the desired level of precision, it is recommended that printed models be produced at an inclination angle of 0°.

Keywords: 3D print; accuracy; dental model; resin; software; trueness.

Publication types

  • Case Reports