Magnetic Particle Spray Mass Spectrometry

Anal Chem. 2024 Apr 9;96(14):5519-5526. doi: 10.1021/acs.analchem.3c05680. Epub 2024 Mar 29.

Abstract

In this work, the concept of magnetic particle spray mass spectrometry (MPS-MS) is reported for the first time. Magnetic sorbent particles are used to extract the analytes from a liquid sample. The particles are magnetically attracted to the tip of a magnetic probe that is positioned at the entrance of the mass spectrometer. A solvent is dispensed on the particles, and a high voltage promotes the formation of the Taylor cone around the particles agglomerate. Analytes are desorbed by the solvent, ionized, and analyzed by mass spectrometry. MPS-MS is totally in consonance with the green chemistry principle. A minimal consumption of sample (100 μL), solvent (34 μL), and magnetic sorbent (500 μg) is needed per analysis for an excellent performance of MPS-MS in terms of sensitivity and selectivity. The determination of amitriptyline, citalopram, clomipramine, chlorpromazine, doxepin, haloperidol, nortriptyline, and venlafaxine in human plasma samples using magnetic restricted-access carbon nanotubes was carried out as a proof of principle. Limits of quantification of 10 μg L-1 and correlation coefficients higher than 0.98 were obtained for all of the analytes. Limits of detection ranged from 0.43 to 2.82 μg L-1. Precision (as relative standard deviation) and accuracies (as relative error) ranged from 3.6 to 23.6%, as well as -12.8 to 18.7%, respectively. MPS-MS opens a new line of developments in the association of sample preparation with ambient ionization. New sorbents, device configurations, and physical and chemical conditions can also be analyzed for the analysis of many other analytes in different samples.