Amperometric creatinine biosensor for hemodialysis patients

Clin Chim Acta. 2001 Oct;312(1-2):129-34. doi: 10.1016/s0009-8981(01)00610-6.

Abstract

Background: Creatinine is an important clinical laboratory parameter for the evaluation of kidney function. It is essential to determine its concentration in serum of patients suffering from renal insufficiency. During hemodialysis treatment, the measurement of creatinine in the effluent dialysate or ultrafiltrate may give additional information on the efficiency of the extracorporal procedure. Therefore, enzyme sensors with co-immobilized creatinine amidohydrolase, creatine amidinohydrolase and sarcosine oxidase have been used to determine creatinine.

Methods: Enzymatically generated hydrogen peroxide has amperometrically been detected at a platinum-working electrode. To exclude electroactive compounds of the sample matrix, which might interfere with the electrochemical measurement, the sensors have additionally been modified by a Nafion membrane.

Results: Such sensors showed a linear detection range of 0.06-1.7 mg/dl for creatinine. Diluting the sample with measuring buffer, it has also been possible to measure pathological creatinine concentrations up to 11 mg/dl. A good correlation between creatinine concentrations in serum, dialysate and ultrafiltrate determined by the presented enzyme sensors and those obtained by both, conventional colorimetric Jaffé and enzymatic measurements have been achieved.

Conclusion: Further developments will aim at the integration of this measuring principle into the concept to low-cost disposable planar sensors.

Publication types

  • Evaluation Study

MeSH terms

  • Biosensing Techniques*
  • Creatine / analysis
  • Creatinine / analysis*
  • Hemodialysis Solutions / analysis
  • Humans
  • Renal Dialysis*
  • Reproducibility of Results

Substances

  • Hemodialysis Solutions
  • Creatinine
  • Creatine