Characterization of red mud derived from a combined Bayer Process and bauxite calcination method

J Hazard Mater. 2007 Jul 19;146(1-2):255-61. doi: 10.1016/j.jhazmat.2006.12.015. Epub 2006 Dec 13.

Abstract

Red mud can be derived from the processing of bauxite using different methods. The chemical and mineralogical composition of the combined Bayer Process and bauxite calcination red mud (BPBCRM) differs markedly from those of the pure Bayer Process red mud (PBPRM). In this study, red mud derived from a combined Bayer Process and bauxite calcination method was characterized. The results show that pH of the red mud decreased with increasing duration of storage time. Na dominated among the soluble cations, but the concentration of soluble Na decreased with increasing duration of storage time as a result of leaching. Cation exchange capacity also decreased with increasing duration of storage time, probably due to a decrease in pH causing a reduction in negatively charged sites on the red mud particles. Ca was the predominant exchangeable cation in the fresh red mud but the concentration of exchangeable Ca markedly decreased in the old red mud, which was dominated by exchangeable Na. The degree of crystallization and thermal stability of the red mud increased with increasing duration of storage. The acid neutralizing capacity of red mud obtained from this study was about 10 mol kg(-1), which is much greater than the reported values for the pure Bayer Process red mud. Column filtering experiment indicates that the red mud also had a very strong capacity to remove Cu, Zn and Cd from the filtering solution. It is conservatively estimated that the simultaneous removal rates of Cd, Zn and Cu by red mud are over 22,250 mg kg(-1), 22,500 mg kg(-1) and 25,000 mg kg(-1), respectively. The affinity of these metals to the red mud was in the following decreasing order: Cu>Zn>Cd. In general, the fresh red mud retained more heavy metals than the old red mud did.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Aluminum Oxide*
  • Environmental Pollutants / analysis
  • Environmental Pollutants / chemistry
  • Hot Temperature
  • Hydrochloric Acid / chemistry
  • Hydrogen-Ion Concentration
  • Industrial Waste / analysis*
  • Metals / analysis
  • Metals / chemistry
  • Sulfuric Acids / chemistry
  • Waste Management / methods

Substances

  • Environmental Pollutants
  • Industrial Waste
  • Metals
  • Sulfuric Acids
  • Aluminum Oxide
  • sulfuric acid
  • Hydrochloric Acid