The aim of this study was to examine the bond strength between acrylic teeth after various surface treatments and processing with either a heat- or microwave-polymerized denture base material. Specimens were prepared and tested according to the methods described in American National Standard/American Dental Association Specification No.15 (Synthetic Polymer Teeth) using a special assembly. Three brands of acrylic teeth were used with the following treatments: control (no treatment), grinding and grinding plus sandblasting. Treatment groups were further divided into two denture base processing subgroups: heat-polymerized and microwave-polymerized methods. Denture base processing to the acrylic teeth was performed according to the manufacturer's recommendations. Bond strength test was performed using a universal testing machine with five specimens and each specimen is composed of six anterior teeth per experimental group. Data were analysed using a three-way anova and the Scheffe'F-test post hoc pair wise comparison at the 95% significance level. The mean bond strength values ranged from 33.1 +/- 4.1 to 51.6 +/- 2.5 MPa. The bond strength values of sandblasted surfaces were significantly higher than those of the ground surface and the control (P < 0.05). Combined (acrylic tooth and denture base resin) cohesive failures were disclosed in all tested samples. Acrylic tooth surface pre-processed surface treatment with grinding plus sandblasting and processed with a heat-polymerized denture base provided the greatest bond strength between acrylic tooth and denture base.