Epitaxial 0.67Pb(Mg(1/3)Nb(2/3))O(3)-PbTiO(3)-0.33PbTiO(3) (PMN-PT) thin films with electro-optic effects were fabricated on (PMN-PT) thin films with electro-optic effects were fabricated on (La0(0.5)Sr0(0.5))CoO(3) (LSCO)/CeO(2)/YSZ-buffered Si(001) substrates using double-pulse excitation pulsed laser deposition (PLD) method with a mask placed between the target and the substrate. Epitaxial growth of PMN-PT thin films was undertaken using the two-step growth method of PMN-PT film. The PMN-PT seed layer was deposited at 500 degrees C on the LSCO/CeO(2)/YSZ/Si, which temperature was the same as that used for LSCO deposition. The PMN-PT thin films were deposited on the PMN-PT seed layer at 600 degrees C, which enables growth of high-crystallinity PMN-PT films with smooth surfaces. We obtained optimum fabrication conditions of PMNPT film with micrometer-order thickness. Resultant films showed high crystallinity with full width at half maximum (FWHM) = 0.73 deg and 1.6 mum thickness. Electro-optic properties and the refractive index value were measured at 633 nm wavelength using the prism coupling method. The obtained refractive index was 2.59. The electro-optic coefficients r(13) and r(33) were determined by applying the electrical field between a semitransparent, thin top electrode of Pt and a bottom LSCO electrode. The electro-optic coefficient was r(13) = 17 pm/V at transverse electric field (TE) mode and r(33) = 55 pm/V at transverse magnetic field (TM) mode.