Copolymer-in-oil phantom materials for elastography

Ultrasound Med Biol. 2009 Jul;35(7):1185-97. doi: 10.1016/j.ultrasmedbio.2009.01.012. Epub 2009 May 7.

Abstract

Phantoms that mimic mechanical and acoustic properties of soft biological tissues are essential to elasticity imaging investigation and to elastography device characterization. Several materials including agar/gelatin, polyvinyl alcohol and polyacrylamide gels have been used successfully in the past to produce tissue phantoms, as reported in the literature. However, it is difficult to find a phantom material with a wide range of stiffness, good stability over time and high resistance to rupture. We aim at developing and testing a new copolymer-in-oil phantom material for elastography. The phantom is composed of a mixture of copolymer, mineral oil and additives for acoustic scattering. The mechanical properties of phantoms were evaluated with a mechanical test instrument and an ultrasound-based elastography technique. The acoustic properties were investigated using a through-transmission water-substituting method. We showed that copolymer-in-oil phantoms are stable over time. Their mechanical and acoustic properties mimic those of most soft tissues: the Young's modulus ranges from 2.2-150 kPa, the attenuation coefficient from 0.4-4.0 dB.cm(-1) and the ultrasound speed from 1420-1464 m/s. Their density is equal to 0.90 +/- 0.04 g/cm3. The results suggest that copolymer-in-oil phantoms are attractive materials for elastography.

Publication types

  • Evaluation Study

MeSH terms

  • Elasticity
  • Elasticity Imaging Techniques / instrumentation*
  • Elasticity Imaging Techniques / methods
  • Equipment Design
  • Humans
  • Materials Testing / methods
  • Mineral Oil*
  • Phantoms, Imaging*
  • Polyethylenes*
  • Polymers
  • Polystyrenes*
  • Viscosity

Substances

  • Polyethylenes
  • Polymers
  • Polystyrenes
  • styrene-ethylene-butylene-styrene-block copolymer
  • Mineral Oil