Arsenate and arsenite may exist simultaneously in groundwater and have led to a greater risk to human health. In this study, an iron-zirconium (Fe-Zr) binary oxide adsorbent for both arsenate and arsenite removal was prepared by a coprecipitation method. The adsorbent was amorphous with a specific surface area of 339 m(2)/g. It was effective for both As(V) and As(III) removal; the maximum adsorption capacities were 46.1 and 120.0 mg/g at pH 7.0, respectively, much higher than for many reported adsorbents. Both As(V) and As(III) adsorption occurred rapidly and achieved equilibrium within 25 h, which were well fitted by the pseudo-second-order equation. Competitive anions hindered the sorption according to the sequence PO(4)(3-)>SiO(3)(2-)>CO(3)(2-)>SO(4)(2-). The ionic strength effect experiment, measurement of zeta potential, and FTIR study indicate that As(V) forms inner-sphere surface complexes, while As(III) forms both inner- and outer-sphere surface complexes at the water/Fe-Zr binary oxide interface. The high uptake capability and good stability of the Fe-Zr binary oxide make it a potentially attractive adsorbent for the removal of both As(V) and As(III) from water.
Copyright © 2011 Elsevier Inc. All rights reserved.