Effect of temperature on continuous fermentative lactic acid (LA) production and bacterial community, and development of LA-producing UASB reactor

Bioresour Technol. 2012 Sep:119:355-61. doi: 10.1016/j.biortech.2012.05.027. Epub 2012 May 23.

Abstract

A frequently used fermentation manner in lactic acid (LA) production, batch fermentation by pure cultures, has a limited practicability: low volumetric productivity and high energy consumption. In this study, continuous LA fermentation was performed in a completely stirred tank reactor at 12h HRT, inoculated with anaerobic digester sludge. Glucose (25 g COD/L) was used as a feedstock and temperature was increased from 35 to 60°C. LA production significantly increased from 50°C, which was negligible up to 45°C, with obvious bacterial community change. At 50 and 55°C, LA production was maximized, reaching 23 g COD/L, corresponding to 92% LA conversion efficiency. Pyrosequencing analysis showed that microbial diversity was simplified at 50-60°C, and the sequences closely related with Bacillus coagulans became predominant, followed by Lactobacillus fermentum. An LA-producing upflow ananerobic sludge blanket reactor was successfully developed, which enhanced the productivity up to 4.8 gLA/L/h by shortening HRT to 4h.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Bacteria, Anaerobic / physiology*
  • Bioreactors / microbiology*
  • Equipment Design
  • Equipment Failure Analysis
  • Lactic Acid / biosynthesis*
  • Lactic Acid / isolation & purification
  • Microbial Consortia / physiology*
  • Sewage / microbiology*
  • Temperature

Substances

  • Sewage
  • Lactic Acid