A biomechanical study comparing helical blade with screw design for sliding hip fixations of unstable intertrochanteric fractures

ScientificWorldJournal. 2013;2013:351936. doi: 10.1155/2013/351936. Epub 2013 Feb 20.


Dynamic hip screw (DHS) is a well-established conventional implant for treating intertrochanteric fracture. However, revision surgery sometimes still occurs due to the cutting out of implants. A helical blade instead of threaded screw (DHS blade) was designed to improve the fixation power of the osteoporotic intertrochanteric fracture. In this study, the biomechanical properties of DHS blade compared to the conventional DHS were evaluated using an unstable AO/OTA 31-A2 intertrochanteric fracture model. Fifty synthetic proximal femoral bone models with such configuration were fixed with DHS and DHS blade in five different positions: centre-centre (CC), superior-centre (SC), inferior-center (IC), centre-anterior (CA), and centre-posterior (CP). All models had undergone mechanical compression test, and the vertical and rotational displacements were recorded. The results showed that DHS blade had less vertical or rotational displacement than the conventional DHS in CC, CA, and IC positions. The greatest vertical and rotational displacements were found at CP position in both groups. Overall speaking, DHS blade was superior in resisting vertical or rotational displacement in comparison to conventional DHS, and the centre-posterior position had the poorest performance in both groups.

Publication types

  • Comparative Study

MeSH terms

  • Biomechanical Phenomena
  • Bone Screws*
  • Fracture Fixation, Internal / methods*
  • Hip Fractures / surgery*
  • Internal Fixators*
  • Models, Anatomic
  • Prosthesis Design