Selective immobilization of proteins in well-defined patterns on substrates has recently attracted considerable attention as an enabling technology for applications ranging from biosensors and BioMEMS to tissue engineering. In this work, a method is reported for low-cost, large scale and high throughput, selective immobilization of proteins on nanopatterned Si, based on colloidal lithography and plasma processing to define the areas (<300 nm) where proteins are selectively immobilized. A close-packed monolayer of PS microparticles is deposited on oxidized Si and, either after microparticle size reduction or alternatively after metal deposition through the PS close-packed monolayer, is used as etching mask to define SiO2 nanoislands (on Si). C4F8 plasma was used to selectively etch and modify the SiO2 nanoislands while depositing a fluorocarbon layer on the Si surface. The plasma-treated surfaces were chemically characterized in terms of functional group identification through XPS analysis and reaction with specific molecules. Highly selective protein immobilization mainly through physical adsorption on SiO2 nanoislands and not on surrounding Si was observed after C4F8 plasma-induced chemical modification of the substrate. The thickness of the immobilized protein monolayer was estimated by means of AFM image analysis. The method reported herein constitutes a cost-efficient route toward rapid, large surface, and high-density patterning of biomolecules on solid supports that can be easily applied in BioMEMS or microanalytical systems.