Effect of Casting Material on the Cast Pressure After Sequential Cast Splitting

J Pediatr Orthop. 2017 Jan;37(1):74-77. doi: 10.1097/BPO.0000000000000574.

Abstract

Background: Circumferential casting is a vital component of nonoperative fracture management. These casts are commonly valved to release pressure and decrease the risk of complications from swelling. However, little information exists regarding the effect of different casting supplies on the pressure within the cast.

Methods: Seventy-five long-arm casts were performed on human volunteers, divided between 5 experimental groups with 15 casts in each groups. Testing groups consisted of 2 groups with a plaster short-arm cast overwrapped with fiberglass to a long arm with either cotton or synthetic cast padding. The 3 remaining groups included fiberglass long-arm casts with cotton, synthetic, or waterproof cast padding. A pediatric blood pressure cuff bladder was placed within the cast and inflated to 100 mm Hg. After inflation, the cast was sequentially released with pressure reading preformed after each stage. Order of release consisted of cast bivalve, cast padding release, and cotton stockinet release. After release, the cast was overwrapped with a loose elastic bandage. Difference in pressure readings were compared based upon the cast material.

Results: Pressures within the cast were found to decrease with sequential release of cast. The cast type had no effect of change in pressure. Post hoc testing demonstrated that the type of cast padding significantly affected the cast pressures with waterproof padding demonstrating the highest pressure readings at all time-points in the study, followed by synthetic padding. Cotton padding had the lowest pressure readings at all time-points.

Discussion: Type of cast padding significantly influences the amount of pressure within a long-arm cast, even after bivalving the cast and cutting the cast padding. Cotton cast padding allows for the greatest change in pressure.

Clinical relevance: Cotton padding demonstrates the greatest change in pressure within a long-arm cast after undergoing bivalve. Synthetic and waterproof cast padding should not be used in the setting of an acute fracture to accommodate swelling.

MeSH terms

  • Calcium Sulfate
  • Casts, Surgical*
  • Cotton Fiber
  • Glass
  • Healthy Volunteers
  • Humans
  • Immobilization / instrumentation*
  • Immobilization / methods
  • Polyesters
  • Polyethylene Terephthalates
  • Polyurethanes
  • Pressure*

Substances

  • Polyesters
  • Polyethylene Terephthalates
  • Polyurethanes
  • fiberglass
  • Scotchcast
  • Calcium Sulfate