Here we describe results of a study to validate minor reagent formulation changes to the Soleris Direct Yeast and Mold (DYM) automated growth-based method for semi-quantitative detection of yeast and mold in food products. In order to reduce the maximum concentration of the selective agent chloramphenicol in the Soleris reagents, chloramphenicol was removed from the selective supplement and added to the vial growth medium itself. Therefore, both the vial medium and supplement have been reformulated in an alternative version of the method. A probability of detection (POD) statistical model was used to compare Soleris results at multiple test thresholds (dilutions) with plate counts determined using the U.S. Food and Drug Administration Bacteriological Analytical Manual dilution plating procedure. Three matrixes were tested; yogurt, tomato juice, and cocoa powder. POD analysis showed that the percentage of positive Soleris tests at various test thresholds were within the limits predicted by the reference method plate counts for all matrixes evaluated. Real-time stability data on three manufactured lots showed that the modified Soleris vial and supplement are stable for at a minimum of 10 months when stored at 2-8°C. In sum, results presented here demonstrate that the modifications to the Soleris DYM vial and supplement do not impact method performance. The modified Soleris DYM method can be used as an accurate alternative to conventional dilution plating procedures for semi-quantitative determination of yeast and mold at threshold levels, while saving as much as 3 days in analysis time.