A tailor-made Cu(II) ion-imprinted polymer based on large-surface-area graphene oxide sheets has been synthesized for the preconcentration and determination of trace copper from food samples by solid-phase extraction. Attributed to the ultrahigh surface area and hydrophilicity of graphene oxide, the Cu(II) ion-imprinted polymer prepared by the surface ion-imprinting technique exhibited a high binding capacity and a fast adsorption rate under the optimized experimental conditions. In the static adsorption experiments, the maximum adsorption capacity of Cu(II) ion-imprinted polymer is 109.38 mg/g at 25°C, which is much higher than that of the nonimprinted polymer (32.12 mg/g). Meanwhile, the adsorption is very rapid and equilibrium is reached after approximately 30 min. The adsorption mechanism is found to follow Langmuir adsorption model and the pseudo-second-order adsorption process. The Cu(II) ion-imprinted polymer was used for extracting and detecting Cu(II) in food samples combined with graphite flame atomic adsorption spectrometry with high recoveries in the range of 97.6-103.3%. The relative standard deviation and limit of detection of the method were evaluated as 1.2% and 0.37 μg/L, respectively. The results showed that the novel absorbent can be utilized as an effective material for the selective enrichment and determination of Cu(II) from food samples.
Keywords: Copper; Graphene oxide composites; Ion-imprinted polymer; Solid-phase extraction.
© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.