Under-vehicle explosions often result in injury of occupants׳ lower extremities. The majority of these injuries are associated with poor outcomes. The protective ability of vehicles against explosions is assessed with Anthropometric Test Devices (ATDs) such as the MIL-Lx, which is designed to behave in a similar way to the human lower extremity when subjected to axial loading. It incorporates tibia load cells, the response of which can provide an indication of the risk of injury to the lower extremity through the use of injury risk curves developed from cadaveric experiments. In this study an axisymmetric finite element model of the MIL-Lx with a combat boot was developed and validated. Model geometry was obtained from measurements taken using digital callipers and rulers from the MIL-Lx, and using CT images for the combat boot. Appropriate experimental methods were used to obtain material properties. These included dynamic, uniaxial compression tests, quasi-static stress-relaxation tests and 3 point bending tests. The model was validated by comparing force-time response measured at the tibia load cells and the amount of compliant element compression obtained experimentally and computationally using two blast-injury experimental rigs. Good correlations between the numerical and experimental results were obtained with both. This model can now be used as a virtual test-bed of mitigation designs and in surrogate device development.
Keywords: Blast; High-rate loading; Lower limb; MIL-Lx; Under-vehicle explosion.
Copyright © 2016 Elsevier Ltd. All rights reserved.