Investigation of fluoride removal from low-salinity groundwater by single-pass constant-voltage capacitive deionization

Wangwang Tang; Peter Kovalsky; Baichuan Cao; T David Waite

doi:10.1016/j.watres.2016.04.047

Investigation of fluoride removal from low-salinity groundwater by single-pass constant-voltage capacitive deionization

Water Res. 2016 Aug 1:99:112-121. doi: 10.1016/j.watres.2016.04.047. Epub 2016 Apr 22.

Authors

Wangwang Tang¹, Peter Kovalsky¹, Baichuan Cao², T David Waite³

Affiliations

¹ School of Civil and Environmental Engineering, University of New South Wales, Sydney, New South Wales 2052, Australia.
² School of Civil and Environmental Engineering, University of New South Wales, Sydney, New South Wales 2052, Australia; Department of Municipal and Environmental Engineering, School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, PR China.
³ School of Civil and Environmental Engineering, University of New South Wales, Sydney, New South Wales 2052, Australia. Electronic address: d.waite@unsw.edu.au.

PMID: 27151285
DOI: 10.1016/j.watres.2016.04.047

Abstract

Capacitive deionization (CDI) is attracting increasing attention as an emerging technology for the facile removal of ionic species from water. In this work, the feasibility of fluoride removal from low-salinity groundwaters by single-pass constant-voltage CDI was investigated and a model developed to describe the dynamic fluoride electrosorption behavior. Effects of operating parameters including charging voltage and pump flow rate as well as impact of fluoride and chloride feed concentrations on the effluent fluoride concentration and equilibrium fluoride adsorption capacity were studied and the obtained data used to validate the model. Using the validated model, the effects of various design parameters, including arrangement of multiple CDI cells, on fluoride removal were assessed. Single-pass constant-voltage CDI was found to be effective in removing fluoride from low-salinity groundwaters but, as expected, removal efficiency was compromised in waters of high salinity. The relatively simple electrosorption model developed here provided a satisfactory description of both fluoride removal and current evolution and would appear to be a useful tool for prediction of CDI performance over a range of operating conditions, cell arrangements and feed water compositions though scope for model improvement exists.

Keywords: Capacitive deionization; Constant voltage; Donnan model; Fluoride removal; Low-salinity groundwater; Single-pass operation.

Publication types

Research Support, Non-U.S. Gov't

MeSH terms

Electrodes
Fluorides*
Groundwater
Salinity*
Water Purification

Substances

Fluorides