Lessons learned from surface wipe sampling for lead in three workplaces

J Occup Environ Hyg. 2017 Aug;14(8):611-619. doi: 10.1080/15459624.2017.1309047.

Abstract

Surface wipe sampling in the occupational environment is a technique widely used by industrial hygienists. Although several organizations have promulgated standards for sampling lead and other metals, uncertainty still exists when trying to determine an appropriate wipe sampling strategy and how to interpret sampling results. Investigators from the National Institute for Occupational Safety and Health (NIOSH) Health Hazard Evaluation Program have used surface wipe sampling as part of their exposure assessment sampling strategies in a wide range of workplaces. This article discusses wipe sampling for measuring lead on surfaces in three facilities: (1) a battery recycling facility; (2) a firing range and gun store; and (3) an electronic scrap recycling facility. We summarize our findings from the facilities and what we learned by integrating wipe sampling into our sampling plan. Wiping sampling demonstrated lead in non-production surfaces in all three workplaces and that the potential that employees were taking lead home to their families existed. We also found that the presence of metals such as tin can interfere with the colorimetric results. We also discuss the advantages and disadvantages of colorimetric analysis of surface wipe samples and the challenges we faced when interpreting wipe sampling results.

Keywords: Battery recycling; colorimetric; electronic scrap recycling; firing range; lead; metals; surface sampling; wipes.

MeSH terms

  • Dust / analysis*
  • Environmental Monitoring / methods*
  • Environmental Monitoring / standards
  • Lead / isolation & purification*
  • National Institute for Occupational Safety and Health, U.S.
  • Occupational Health / standards
  • Recycling
  • United States
  • Workplace

Substances

  • Dust
  • Lead