Fungal Fragments and Fungal Aerosol Composition in Sawmills

Ann Work Expo Health. 2018 May 28;62(5):559-570. doi: 10.1093/annweh/wxy022.

Abstract

Assessment of exposure to fungi has commonly been limited to fungal spore measurements that have shown associations between fungi and development or exacerbation of different airway diseases. Because large numbers of submicronic fragments can be aerosolized from fungal cultures under laboratory conditions, it has been suggested that fungal exposure is more complex and higher than that commonly revealed by spore measurements. However, the assessment of fungal fragments in complex environmental matrix remain limited due to methodological challenges. With a recently developed immunolabeling method for field emission scanning electron microscope (FESEM), we could assess the complex composition of fungal aerosols present in personal thoracic samples collected from two Norwegian sawmills. We found that large fungal fragments (length >1 µm) dominated the fungal aerosols indicating that the traditional monitoring approach of spores severely underestimate fungal exposure. The composition of fungal aerosols comprised in average 9% submicronic fragments, 62% large fragments, and 29% spores. The average concentrations of large and submicronic fragments (0.2-1 µm) were 3 × 105 and 0.6 × 105 particles m-3, respectively, and correlated weakly with spores (1.4 × 105 particles m-3). The levels of fragments were 2.6 times higher than the average spore concentration that was close to the proposed hazardous level of 105 spores per m3. The season influenced significantly the fungal aerosol concentrations but not the composition. Furthermore, the ratio of spores in the heterogeneous fungal aerosol composition was significantly higher in saw departments as compared to sorting of green timber departments where the fungal fragments were most prevalent. Being the dominating particles of fungal aerosols in sawmills, fungal fragments should be included in exposure-response studies to elucidate their importance for health impairments. Likewise, the use of fungal aerosol composition in such studies should be considered.

MeSH terms

  • Aerosols / analysis*
  • Air Microbiology*
  • Environmental Monitoring / methods*
  • Fungi / isolation & purification*
  • Humans
  • Manufacturing Industry
  • Microscopy, Electron, Scanning
  • Norway
  • Occupational Exposure / analysis*
  • Seasons
  • Spores, Fungal / isolation & purification
  • Workplace

Substances

  • Aerosols