A nanocomposite (NC) of type Cu/Cu2O/CuO@MoS4 was obtained via coprecipitation and a hydrothermal approach from copper oxide nanoparticles and MoS4 nanostructures. A series of nanocomposites has been fabricated with varying fractions of MoS4. The NCs were characterized by XRD, XPS, SEM and TEM. The synergistic effect of enlarged specific surface, high electrocatalytic activity and the presence of mixed valencies strongly enhance the redox response at the interface of a glassy carbon electrode (GCE) modified with the NC. The intercalation properties of MoS4 in the NCs result in outstanding electro-oxidative performance towards bisphenol A (BPA). The modified GCE, best operated at +0.16 V vs. SCE, has a linear response in the 0.0001 μM to 17 μM BPA concentration range (R2 = 0.998) and high sensitivity (1587 mA μM-1 cm-2). The sensor can detect BPA with very good selectivity, enhanced storage stability and a low detection limit of 0.10 nM (S/N = 3). This is the lowest value among the non-enzymatic biosensors reported until now. The sensor was used for real-time in-vitro monitoring of BPA in (spiked) serum samples. Graphical abstract Schematic representation of Cu/Cu2O/CuO@MoS4 hybrid material fabricated by a hydrothermal method for sensitive determination of bisphenol A (BPA) from biological fluids.
Keywords: Bisphenol A; Cu/Cu2O/CuO@MoS4 nanocomposite; Electrochemical sensor; In-vitro tracking; Serum sample.