Relating a crystal's microscopic structure-such as orientation and size-to a material's macroscopic properties is of great importance in materials science. Although most crystal orientation microscopy is performed in the scanning electron microscope (SEM), transmission electron microscopy (TEM)-based methods have a number of benefits, including higher spatial resolution. Current TEM orientation methods have either specific hardware requirements or use software that has limited scope, utility, or availability. In this article, a technique is described for orientation mapping using Kikuchi diffraction patterns generated from a focused STEM probe. One key advantage is that indexing and analysis of the patterns and maps occurs in the robust OIM Analysis software, currently widely used for electron backscatter diffraction (EBSD) and transmission Kikuchi diffraction (TKD) analysis. It was found that with minimal to no image processing and by changing only a few software parameters, reliable indexing of Kikuchi patterns is possible. Three samples, a deformed β-Titanium (Ti), a medium carbon heat-treated steel, and BaCe0.8Y0.2O3-δ were tested to determine the effectiveness of the approach. In all three measurements the algorithms effectively and reliably determined the phases and the crystal orientations of the features measured. For the two orientation maps produced, less than 5% of the patterns were misindexed including boundary areas where overlapping patterns existed. An angular resolution of 0.15° was achieved while features <25 nm were able to be spatially resolved.
Keywords: Electron diffraction; Misorientation; Orientation imaging; Transmission electron microscope.
Copyright © 2019 Elsevier B.V. All rights reserved.