Structural and optical characteristics determined by the sputtering deposition conditions of oxide thin films

Beilstein J Nanotechnol. 2021 Apr 19:12:354-365. doi: 10.3762/bjnano.12.29. eCollection 2021.

Abstract

The influence of film thickness on the structural and optical properties of silicon dioxide (SiO2) and zinc oxide (ZnO) thin films deposited by radio frequency magnetron sputtering on quartz substrates was investigated. The deposition conditions were optimized to achieve stoichiometric thin films. The orientation of crystallites, structure, and composition were investigated by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), while the surface topography of the samples was analyzed using scanning electron microscopy (SEM). The optical characteristics were measured for samples with the same composition but obtained with different deposition parameters, such as increasing thickness. The optical constants (i.e., the refractive index n, the extinction coefficient k, and the absorption coefficient α) of the SiO2 and ZnO oxide films were determined from the transmission spectra recorded in the range of 190-2500 nm by using the Swanepoel method, while the energy bandgap was calculated from the absorption spectra. The influence of thickness on the structural and optical properties of the oxide films was investigated. Good optical quality and performance were noticed, which makes these thin films worthy of integration into metamaterial structures.

Keywords: SiO2 and ZnO; magnetron sputtering; optical quality; structural properties; thin films.

Grants and funding

This research was supported by the ELI [contract number 04/2020] and the Program NUCLEU-LAPLAS VI 16N/2019.