In this study, we demonstrate the feasibility of Bi-doped tetrahedrite Cu12Sb4-xBixS13 (x = 0.02-0.20) synthesis in an industrial eccentric vibratory mill using Cu, Sb, Bi and S elemental precursors. High-energy milling was followed by spark plasma sintering. In all the samples, the prevailing content of tetrahedrite Cu12Sb4S13 (71-87%) and famatinite Cu3SbS4 (13-21%), together with small amounts of skinnerite Cu3SbS3, have been detected. The occurrence of the individual Cu-Sb-S phases and oxidation states of bismuth identified as Bi0 and Bi3+ are correlated. The most prominent effect of the simultaneous milling and doping on the thermoelectric properties is a decrease in the total thermal conductivity (κ) with increasing Bi content, in relation with the increasing amount of famatinite and skinnerite contents. The lowest value of κ was achieved for x = 0.2 (1.1 W m-1 K-1 at 675 K). However, this sample also manifests the lowest electrical conductivity σ, combined with relatively unchanged values for the Seebeck coefficient (S) compared with the un-doped sample. Overall, the lowered electrical performances outweigh the benefits from the decrease in thermal conductivity and the resulting figure-of-merit values illustrate a degradation effect of Bi doping on the thermoelectric properties of tetrahedrite in these synthesis conditions.
Keywords: bismuth; doping; high-energy milling; tetrahedrite; thermoelectricity.