Investigations are conducted in order to maintain or to improve the selected properties of the group of foundry copper-tin alloys with nickel and titanium additions, at a limited fraction of the critical (deficit) element such as tin. The crystallisation process, as well as changes of the microstructure and selected mechanical properties of the CuSn8 alloy-occurring due to introducing alloying additions-were analysed. Investigations of the macro and microstructure were performed using optical and scanning electron microscopy. Based on the thermal analysis and thermodynamic modelling using the CALPHAD (CALculations of PHAse Diagrams) method, the crystallisation process was analysed. The identification of phases was performed by XRD (X-ray diffraction). In addition, such parameters as tensile strength-UTS, elongation-A and hardness-HBS were tested. Under the influence of the introduced titanium, the columnar crystals are reduced due to the crystallisation of the alloy at the walls of the mould. Precipitations (intermetallic phases) crystallize first (primary). The intermetallic phases associated with the presence of the alloying elements nickel and titanium are located in the interdendritic regions. In tin bronzes with titanium additions, hardness (HBS) increases, tensile strength (UTS) negligibly decreases, while elongation (A) significantly decreases. In the case of CuSnNi bronze, the addition of 0.2 wt.% Ti increases the hardness and increases ultimate tensile strength (UTS), while reducing the elongation (A). Higher Ti additions increase HBS, slightly decrease the tensile strength, and significantly reduce the elongation.
Keywords: CALPHAD; Cu-Sn bronze alloys; copper alloys; mechanical properties; metallography; solidification process.