Potential applications of spent adsorbents and catalysts: Re-valorization of waste

Sci Total Environ. 2022 Jun 1:823:153370. doi: 10.1016/j.scitotenv.2022.153370. Epub 2022 Jan 29.

Abstract

Water pollution has increased with the growth of human population and its industrial activities. Textile effluents constitute a particular threat due to the presence of heavy metals and dyes. Adsorption is one of the most applied technologies in contaminant removal owing to its high efficiency, low cost, practical implementation and possibility to operate in several experimental conditions. However, this process implies the generation of spent materials, representing a limitation to scale-up. Although the applications of exhausted solids in effluent treatments have not been extensively reviewed before, their reutilization appears to be an environmentally and economically attainable alternative. This work summarizes the potential value of solids post-use. The open literature reports that spent adsorbents based on polysaccharides with iron oxides may adsorb up to 1 g g-1 of organic pollutants and up to near 100% of metallic ions from wastewater (Cu2+, Cd2+, Zn2+, Pb2+). The studied conditions vary from 30 to 60 °C, 0,05 to 6 g L-1 of adsorbent, 10 mg L-1 to 250 mg L-1 of organic pollutants (dyes) and pH between 2 and 8. Spent adsorbents in dye removal have proven to have near 95% efficiency in metallic ion adsorption. Otherwise, the spent solids could be applied to remove Ca2+ and Mg2+ to decrease the hardness of water. Furthermore, at the end-of-life, these materials could be used in cement and ceramic production. To achieve these aims, it is necessary to design the bioadsorbents and biocatalysts considering not only their primary uses (as adsorbent of organic pollutants), but also secondary applications (as toxic metal or hardness removal) and even their final destination (as additive in ceramic or cement production). Finally, further studies are required on the composition, properties, stability at long-term and the life-cycle cost of these materials when they are applied in the construction industry.

Keywords: Reutilization; Spent adsorbent; Sustainability; Waste valorization; Wastewater treatment.

Publication types

  • Review

MeSH terms

  • Adsorption
  • Humans
  • Industrial Waste
  • Metals, Heavy* / chemistry
  • Wastewater / chemistry
  • Water Pollutants, Chemical* / analysis
  • Water Purification*

Substances

  • Industrial Waste
  • Metals, Heavy
  • Waste Water
  • Water Pollutants, Chemical