There has been increasing concern over the mixed discharge of municipal-textile composite wastewater, which remains challenging for typical wastewater treatment plant (WWTP) using anaerobic-anoxic-oxic process (AAO). Highly-toxic aniline and antimony, typical co-contaminants in textile wastewater, usually lead to increased chemical oxygen demand (COD) in influent and deteriorated effluent quality. Amidoxime-modified polyacrylonitrile (amPAN) adsorbent was prepared and added to adsorb antimony and facilitate substrate removal. With amPAN dosage at 6.0 g L-1 in oxic bioreactor, 64.2 ± 5.6% of antimony was removed from influent. Extracellular polymeric substance release was simultaneously changed with residual antimony concentration. Meanwhile, amPAN promoted the proliferation of Proteobacteria, Bacteroidetes and Epsilonbacteraeota serving as microorganism carrier. As a result, removal efficiencies of COD (94.4 ± 0.6%), ammonium (NH4+-N, 92.6 ± 3.3%), total nitrogen (TN, 76.4 ± 6.3%) and total phosphorus (TP, 93.4 ± 2.1%) were enhanced to meet Class 1A discharge standard in China. These results indicate that AAO with amPAN is promising for municipal-textile composite wastewater treatment.
Keywords: Activated sludge; Adsorbent; Removal efficiency; Textile wastewater; Toxicity.
Copyright © 2022. Published by Elsevier Ltd.