One-dimensional MOF-derived magnetic composites for efficient microwave absorption at ultralow thickness through controllable hydrogen reduction

Wei Liu; Pengtao Duan; Yue Ding; Bowei Zhang; Hailin Su; Xuebin Zhang; Jinzhi Wang; Zhongqiu Zou

doi:10.1039/d2dt00113f

One-dimensional MOF-derived magnetic composites for efficient microwave absorption at ultralow thickness through controllable hydrogen reduction

Dalton Trans. 2022 May 3;51(17):6597-6606. doi: 10.1039/d2dt00113f.

Authors

Wei Liu^{1

2}, Pengtao Duan^{1

2}, Yue Ding^{1

2}, Bowei Zhang^{1

2}, Hailin Su^{1

2

3

4}, Xuebin Zhang^{1

2

3

4}, Jinzhi Wang⁵, Zhongqiu Zou^{3

4}

Affiliations

¹ Engineering Research Center of High Performance Copper Alloy Materials and Processing, Ministry of Education, Hefei University of Technology, Hefei, 230009, China.
² School of Materials Science and Engineering and Anhui Provincial Key Laboratory of Advanced Functional Materials and Devices, Hefei University of Technology, Hefei, 230009, China. hailinsu@hfut.edu.cn.
³ Huaian Engineering Research Center of Soft Magnetic Powder Cores and Devices, Jiangsu Red Magnetic Materials Incorporation, Huaian, 211700, China.
⁴ Anhui Red Magneto-electric Technology Co., Ltd, Wuhu, 241002, China.
⁵ School of Materials and Chemistry Engineering, Ningbo University of Technology, Ningbo, 315211, China. wangjz@nbut.edu.cn.

PMID: 35383348
DOI: 10.1039/d2dt00113f

Abstract

Magnetic materials with ingeniously designed structures may be utilized as highly efficient microwave absorbing materials (MAMs) working at ultralow matching thicknesses. However, it remains a challenge to decrease the matching thickness by synergistically tailoring the composition and structure of magnetic MAMs. In this work, a series of magnetic MAMs have been synthesized by sequentially annealing Fe-bdc nanorods in air and hydrogen. The results show that with the increase in hydrogen reduction temperature, the Fe₂O₃ nanorods would be gradually converted into Fe₂O₃/Fe₃O₄/C, Fe₃O₄/C, Fe₃O₄/FeO/Fe/C and Fe/C composites. In the meantime, obvious particle shrinkage would first occur and significant crystal growth would then happen, leading to the disappearance of pores, the decrease in axial length and the increase in particle size. In addition, a higher reduction temperature always leads to higher complex permittivity (ε_r) and permeability (μ_r), which should be related to the higher content of Fe₃O₄ and Fe. Nevertheless, one-dimensional structures and surface oxidation may cause abnormal ε_r and μ_r. As for HR-350, the one-dimensional structure results in strong conduction loss, the Fe₃O₄/C interfaces contribute to polarization loss, and semiconductive Fe₃O₄ and amorphous carbon favor superior impedance matching. Consequently, an RL peak value of -43.77 dB can be obtained with an effective absorption bandwidth of 3.52 GHz, when the thickness is only 1.2 mm. This work may provide novel insights into the design of MAMs with broadband absorption at ultralow matching thicknesses and provide a good reference for the synthesis of MOF-derived magnetic materials.