Potential for off-target movements follows every herbicide application. Because the launch of acetolactate synthase (ALS)- and 4-hydroxyphenylpyruvate dioxygenase (HPPD)-inhibiting herbicide-tolerant crops will increase the treated area, there is a need to assess the possible negative consequences of any particle drift from those herbicides. Drift happens with every pesticide application, requiring mitigation. Various factors influence drift. Some, such as nozzle type, working pressure, and boom height, can be managed. Others, such as wind, are not easy to manage. In our study, an herbicide tank mixture of mesotrione with rimsulfuron plus thifensulfuron-methyl was sprayed in a low-speed wind tunnel to simulate drift. The airspeed was set at 4.4 m s-1, representing the labeled upper limit for applications. The herbicide solution was sprayed through XR110015 and TTI110015 nozzles. Eight crops were exposed to herbicide drift treatments and biomass data were collected. Droplet size spectra and tracer depositions were evaluated. Tracer deposition was on average threefold higher in all downwind distances (0.5, 1, 2, 3, 4, 6, 9, and 12 m) from the XR nozzle in comparison to the TTI nozzle. As a consequence, greater biomass reduction was recorded for applications with the XR compared to the TTI nozzle from 1 to 12 m downwind. At 12-m distance, biomass was decreased by 7-78% using XR nozzle while 1-27% using the TTI nozzle. Because drift can injure crops, it is very important to mitigate drift from application of formulations containing mesotrione and rimsulfuron plus thifensulfuron-methyl in combination. This can be done by selecting the appropriate nozzle and ensuring optimal distances between crops.
Keywords: Air induction nozzle; Crop biomass reduction; Crop injury; Tank mixture.
© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.