Characteristics of trace elements and potential environmental risks of the ash from agricultural straw direct combustion biomass power plant

Abstract

The rapid expansion of biomass power generation has resulted in a large amount of ash, which need to be treated urgently. The trace elements in ash also have environmental risks during treatment. Therefore, the essential characteristics and potential environmental risks of biomass ash generated by direct combustion of agricultural straw were studied. The leaching characteristics of elements, including major elements (Mg, K, Ca) and trace elements (V, Cr, Mn, Co, Ni, Cu, Zn, Cd, As, Pb and Ba), in fly ash and slag produced by biomass power plant were analyzed through the static leaching experiments of simulating the possible pH value of natural water in the laboratory. The results show that the trace elements are enriched in fly ash and slag, which may be related to the volatility of elements during combustion. And during the leaching test, the leaching concentration of major and trace elements in fly ash is higher than that in slag. Sequential chemical extraction is used to reveal the occurrence forms of trace elements in biomass ash. Except for residue, Mn, Co, Zn, Cd, and Pb in fly ash mainly exist in carbonate bound, V and As are Fe-Mn oxides bound, and Cr, Ni, Cu, and Ba are mainly organic matter bound. In the slag, Cd is mainly carbonate bound, Cu is mainly organic matter bound, while other elements are mainly Fe-Mn oxides bound. The Risk Assessment Code values calculated based on the existing forms of elements show that As and Cd in slag and Mn, Co, Pb and Cd in fly ash need special attention during utilization. The research results can provide reference for the management and utilization of biomass ash.

Keywords: Biomass ash; Chemical speciation; Environmental risks.; Leaching characteristics; Trace element.