For traditional wide-bandgap semiconductor materials, a high-temperature process is unavoidable for improving crystallization quality, so the substrate of the device is greatly limited. In this work, zinc-tin oxide (a-ZTO) amorphous oxide processed by the pulsed laser deposition method was utilized as the n-type layer, which exhibits considerable electron mobility and optical transparency, and can be deposited at room temperature. At the same time, by combining p-type CuI grown by the thermal evaporation method, a vertically structured ultraviolet photodetector based on CuI/ZTO heterojunction was obtained. The detector demonstrates self-powered properties, with an on-off ratio exceeding 104, and rapid response with a rise time of 2.36 ms and a fall time of 1.49 ms. Also, the photodetector shows long-term stability with 92% retention after 5000 s cyclic lighting and maintains reproducible response in frequency dependence measurement. Furthermore, the flexible photodetector on poly(ethylene terephthalate) (PET) substrates was constructed, exhibiting fast response and durability in the bending state. This is the first time that the heterostructure based on CuI has been applied in the flexible photodetector. The excellent results indicate that the combination of amorphous oxide and CuI has the potential for ultraviolet photodetectors, and will broaden the application range of high-performance flexible/transparent optoelectronic devices in the future.
Keywords: amorphous oxide; copper iodide; flexible photodetector; heterojunction; self-powered.