Upcycling of post-industrial starch-based thermoplastics and their talc-filled sustainable biocomposites for single-use plastic alternative

Abstract

This study utilized post-industrial wheat starch (biological macromolecule) for the development of poly(butylene adipate-co-terephthalate) (PBAT) based thermoplastic starch blend (TPS) and biocomposite films. PBAT (70 wt%) was blended with plasticized post-industrial wheat starch (PPWS) (30 wt%) and reinforced with talc master batch (MB) (25 wt%) using a two-step process, consisting of compounding the blend for pellet preparation, followed by the cast film extrusion at 160 °C. The effect of the chain extender was analyzed at compounding temperatures of 160 and 180 °C for talc-based composites. The incorporation of talc MB has increased the thermal stability of the biocomposites due to the nucleating effect of talc. Moreover, tensile strength and Young's modulus increased by about 5 and 517 %, respectively as compared with the TPS blend film without talc MB. Thermal, rheological, and morphological analyses confirmed that the use of talc in the presence of chain extender at a processing temperature of 160 °C has resulted in an enhanced dispersion of talc and chain entanglement with PBAT and PPWS than PBAT/PPWS blend and PBAT/PPWS/Talc composite films. On the other hand, at 180 °C, the talc-containing biocomposite with chain extender tended to form PPWS agglomerates, thereby weakening its material properties.

Keywords: Biocomposite films; Mechanical properties; PBAT; Post-industrial starch; Thermal properties.