Phase morphology, rheological behavior and mechanical properties of supertough biobased poly(lactic acid) reactive ternary blends

Abstract

Poly(lactic acid) (PLA) is one of the most promising bio-based polyester with great potential to replace for the petroleum-based polymers, which can significantly reduce greenhouse gas emissions. However, the inherent brittleness of PLA seriously restricts its broad applications. Herein, PLA/poly(ε-caprolactone) (PCL)/ethylene methyl acrylate-glycidyl methacrylate (EMA-GMA) ternary blends with different phase structures were prepared through reactive blending. The reactions between the epoxy groups of EMA-GMA and the carboxyl and hydroxyl end groups of PLA and PCL and were evidenced from the Fourier transform infrared spectroscopy, dynamic mechanical analysis and rheological results. The atomic force microscopy (AFM) images clearly revealed the formation of stack structure of the PCL and EMA-GMA minor phases in PLA/PCL/EMA-GMA (80/15/5) blend, and core-shell particle structures in PLA/PCL/EMA-GMA (80/10/10) and (80/5/15) blends. In terms of elongation at break and impact toughness, PLA/PCL/EMA-GMA (80/5/15) blend presents the best properties among all the compositions. Moreover, it also behaved excellent stiffness-toughness balance. The toughening mechanism can be ascribed to the formation of core-shell structure and the existence of interfacial adhesion in the ternary blends. This work can provide guide for the preparation and design of PLA-based partially renewable supertough materials that can compete with conventional petro-derived plastics.

Keywords: Biobased; Mechanical properties; Poly(lactic acid); Reactive melt blending.