Less invasive fixation techniques, such as intramedullary nailing (IMN) and minimally invasive percutaneous plate osteosynthesis (MIPPO), are now the preferred choices for treating tibia shaft fractures (TSFs). However, malreduction and radiation exposure are the main deficiencies associated with less invasive fixation techniques, especially when assessing rotation around the shaft axis intra-operatively. The purpose of this study was to investigate the feasibility and reduction accuracy of an innovative technology that integrates robotics and 3D printing for achieving anatomical reduction of TSFs with MIPPO. The surgical workflow from a standardized CT protocol, via 3D reconstruction, 3D printing tibia model, pre-contouring plate, 3D scanning plate, 3D planning of the trajectories of the robot, and use of a commercial surgical robot, robot-assisted screw hole drilling, to automatic fracture reduction through precise installation of the plate was described. The reduction accuracy was evaluated by an optical tracking system. The mean variations of 1.95 ± 1.36mm in length, 1.63 ± 0.92 mm in apposition, 2.78 ± 1.69° in alignment, and 1.99 ± 1.81° in rotation. The interoperator reliabilities were almost perfect, with values of 0.91, 0.93, 0.92, and 0.90, respectively. The proposed technology achieved anatomic reduction on phantom bones.
Keywords: 3D printing; Anatomic reduction; Robotics-assisted fracture surgery; Tibia shaft fracture.
Copyright © 2023. Published by Elsevier Ltd.