Real time parameter measurement cannot be carried out to dynamic ring parts during automation ring rolling processes so that rolling process parameters cannot be adjusted in time. Considering effects of shaping of ring rolling parts, a visual measurement platform was set up and a machine vision-based non-contact real -time measurement method was put forward. This article improves the subpixel level edge extraction algorithm to extract edge data information of circular rolling pieces. Based on the characteristics of circular rolling pieces, an RG-Hough transform method is proposed to fit the detected edge data information. The conversion relationship between pixel and actual sizes were determined in combination with the camera calibration to gain parameters of ring rolling parts. Measurements of ring parts (OD: 462.12mm; and ID: 315.53mm) were applied to verify the effectiveness of our method. Our measurement error is ±0.25mm and our average speed can be up to 104ms/frame. Our study can provide powerful technical supports for intelligent control of ring rolling pieces.
Copyright: © 2024 Fu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.