We experimentally investigated the coalescence-induced droplet-particle jumping phenomenon on a submillimeter scale in symmetric and asymmetric particle arrangements with poly(methyl methacrylate) (PMMA) particles and stainless steel (SS) particles. Coalescence-induced droplet-particle jumping exhibited excellent capability and interesting behavior for both droplet jumping enhancement and particle transport. The particle increased the normalized droplet jumping velocity from 0.250 for no particle case to 0.315 and 0.320 for symmetric and asymmetric particle cases. Compared with similar-sized macrostructures fixed between droplets, better jumping performance with particles may be attributed to avoiding the work of adhesion during droplet-macrostructure separation. Besides, all particles always sunk at the bottom in the symmetric cases, while the stick mode for PMMA particles and sink, wander, and jet modes for SS particles appeared in the asymmetry cases. We revealed that the asymmetric particle arrangement induces an unbalanced surface tension force, which may provide a driving force in the vertical direction. Additionally, a small enough resistive force caused by hydrophobic particles is another necessary condition for the wonder and jet mode. Finally, we realized a significantly superior particle transport in the asymmetric SS particle cases with maximum particle height reaching ∼2.1 mm, ∼12.4 times the particle radius, the most significant vertical self-propelled transport distance currently.
Keywords: asymmetry; coalescence-induced droplet jumping; particle transport; self-cleaning; surface tension.