The settling of microplastics (MPs) in the initial acceleration fall stage, i.e., before reaching the terminal settling velocity, has not been investigated, which is however important for understanding MP transport and fate. MP disks sized 3-5 mm, of three shapes and made of three polymers (1.038-1.343 g/cm3) were examined. Five release ways and three release angles (0°, 45°, 90°) were used. MP disks with the release angle of 0° start to zigzag immediately after the release, while the MP disks with the release angles of 45° and 90° first adjust to a horizontal position and then zigzag. The adjustment distances in the vertical and horizontal directions, as well as the maximum vertical settling velocity, are influenced by MP density, size, release angle and release way. The detailed settling trajectory and velocity were also analyzed. Finally, the time-changing drag coefficient of MP disks was examined and discussed.
Keywords: Acceleration motion; Microplastic disks; Settling velocity; Trajectory.
Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.