Shotcrete is a versatile construction material, yet its performance limitations, such as high rebound rates and poor adhesion, demand technological improvements to ensure structural reliability. Silicon manganese (SiMn) slag, a by-product of SiMn alloy production, has gained attention as a potential sustainable alternative to natural aggregates in construction materials, addressing both resource depletion and carbon reduction challenges in the industry. This study is conducted to develop and evaluate a new mix design of mortar incorporating SiMn slag as fine aggregate, focusing on enhancing performance. Mixtures with varying percentages (0%, 30%, 50%, 70%, and 100%) of SiMn slag as a fine aggregate replacement were evaluated for fresh properties (air content, slump), mechanical performance (compressive strength, flexural strength, splitting tensile strength), durability (chloride ion penetration resistance, freeze-thaw resistance, carbonation resistance), and constructability (rebound rate, free shrinkage) to assess suitability as mortar for shotcrete. The experimental results demonstrated that the mixture with 50% SiMn slag replacement demonstrated the most balanced performance, showing an increase of 12.33% in compressive strength, 8.97% in splitting tensile strength, and 18.4% in flexural strength compared to the control. Durability properties also improved by an average of 11.93%, while rebound rate and shrinkage were significantly reduced. The findings confirm that SiMn slag is a technically viable and advantageous substitute for fine aggregates in shotcrete. Further research is needed to refine its economic feasibility and broaden its implementation in sustainable construction.
Keywords: aggregate replacement; constructability; durability; shotcrete; silicon manganese slag; sustainability; workability.