Mechanical stability of thoracolumbar pedicle screw fixation. The effect of crosslinks

Spine (Phila Pa 1976). 1997 Jul 15;22(14):1568-72; discussion 1573. doi: 10.1097/00007632-199707150-00007.

Abstract

Study design: Pedicle screw fixation for unstable thoracolumbar spine injuries is relatively new. The effect of one or two crosslinks on rotational and lateral bending stiffness was studied.

Objective: To determine the rotational and bending stiffness values of thoracolumbar fractures fixed by the AO's internal fixation system with zero, one, or two crosslinks.

Methods: Eight embalmed thoracolumbar spine segments. (T12-L2) were instrumented at T12 and L2 with a pedicle screw-rod system. Rotational stiffness was determined for 10 cycles to 2.5 degrees, 3.5 degrees, and 5 degrees of rotation, with and without one or two crosslinks, and lateral bending stiffness for 10 cycles to 0.25, 0.40, and 0.50 inch. The results showed a clear trend toward increased stiffness with crosslinks.

Results: The stiffness values of the two-crosslink construct at 2.5 degrees and 3.5 degrees of rotation were significantly higher than those of the zero-crosslink system. Also, the bending stiffness of the two-crosslink construct was significantly higher than that of no-crosslink system at all of the displacements.

Conclusions: Rotational stiffness values of the two-crosslink construct were significantly higher than those of the zero-crosslink system, at 2.5 degrees and 3.5 degrees of rotation. Lateral bending stiffness of the two-crosslink system was higher than that of the zero-crosslink system at all levels of displacement.

MeSH terms

  • Biomechanical Phenomena
  • Bone Screws*
  • Cadaver
  • Humans
  • Joint Instability / surgery*
  • Lumbar Vertebrae / surgery*
  • Materials Testing
  • Rotation
  • Stress, Mechanical
  • Thoracic Vertebrae / surgery*
  • Torsion Abnormality