Purpose: To determine the surface hardness and in vitro wear of glass ionomer cements (GIC) and compomers in comparison with a resin composite and to test for a possible correlation between the determined hardness and wear values.
Materials and methods: Samples were made of conventional GIC (Ketac-Fil, Fuji II, Fuji IX, Ketac-Prototype = Ketac-Molar), resin-modified GIC (Photac-Fil, Fuji II LC, Vitremer), compomers (Dyract, Compoglass) and resin composite (Z100) for the hardness test (n = 10) and for the wear test (n = 3). The materials were handled according to the manufacturers' instructions. The samples were stored in deionized water for 48 hours at 37 degrees C prior to the determination of Rockwell hardness and three-body in vitro wear.
Results: Hardness could not be measured on Ketac-Fil and Fuji II as the samples fractured before a reading was obtainable. Statistically significant differences were found in hardness and wear between brands and between the four types of material. Surface hardness: resin-modified GIC < conventional GIC = compomers < resin composite. In vitro wear: resin-modified GIC > compomers > conventional GIC > resin composite. A negative correlation between hardness and wear was recorded.