Electrostatic charge in plastic spacer devices has been shown in vitro to reduce delivery of asthma medications intended for inhalation, but the effect of static charge on in vivo drug deposition is unknown. A six-way randomized crossover study was conducted in 10 mild asthmatic patients. Two plastic spacers (Nebuhaler and Volumatic) and one metal spacer (Nebuchamber) were tested. The spacers were used either "primed" or "unprimed". Priming was performed by firing 20 doses of placebo aerosol into a new spacer, hence coating the inner surface with surfactant and minimizing static charge. Unprimed spacers were new and were not treated. Pressurized aerosol canisters delivering budesonide (200 microg Pulmicort) were radiolabelled with the radionuclide 99mTc and lung deposition was measured by gamma scintigraphy. The radiolabel was shown to be a valid marker for the drug substance prior to the clinical phase of the study. Priming significantly increased mean whole lung deposition following inhalation from plastic spacers (Nebuhaler primed 37.7% and unprimed 26.7%, p=0.01; Volumatic primed 32.0% and unprimed 22.1%, p=0.02). Priming had no effect on the mean whole lung deposition following inhalation from the Nebuchamber (primed 33.5% and unprimed 32.9%). Lung deposition in vivo from plastic spacer devices will vary according to the electrostatic charge on the spacer walls. Priming reduces retention of drug on plastic spacer devices and increases lung deposition. Metal spacers are not susceptible to static charge, which should result in more predictable lung deposition.