Skip to main page content
Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation

Search Page

MyNCBI Filters
Results by year

Table representation of search results timeline featuring number of search results per year.

Year Number of Results
1945 1
1946 8
1947 18
1948 14
1949 12
1950 10
1951 18
1952 3
1953 10
1954 13
1955 19
1956 7
1957 22
1958 11
1959 12
1960 14
1961 23
1962 22
1963 40
1964 73
1965 69
1966 78
1967 119
1968 276
1969 417
1970 491
1971 486
1972 590
1973 556
1974 684
1975 705
1976 562
1977 589
1978 612
1979 711
1980 678
1981 711
1982 799
1983 1054
1984 1071
1985 1207
1986 1102
1987 807
1988 828
1989 875
1990 999
1991 1094
1992 1182
1993 1093
1994 1182
1995 1274
1996 1266
1997 1505
1998 1517
1999 1498
2000 1755
2001 1902
2002 2090
2003 2369
2004 3465
2005 4195
2006 4900
2007 5731
2008 6620
2009 7185
2010 8252
2011 9138
2012 8929
2013 9057
2014 7714
2015 6971
2016 5758
2017 5412
2018 5827
2019 3543
2020 130
Text availability
Article attribute
Article type
Publication date

Search Results

126,759 results
Results by year
Filters applied: . Clear all
Page 1
Surface Properties of Synthesized Nanoporous Carbon and Silica Matrices.
Sterczyńska A, et al. J Vis Exp 2019. PMID 30985759
This work describes the surface properties of nanoporous molecular sieves, their wettability, and the melting behavior of D2O confined in the differently ordered porous materials with similar pore sizes. ...This suggests that investigated OMC has surface properties related to oxygen-based functional groups. To describe the surface properties of the materials, the contact angles of liquids penetrating the studied porous beds are also determined. ...
This work describes the surface properties of nanoporous molecular sieves, their wettability, and the melting behavior of D2O …
Surface properties of resin-based composite materials and biofilm formation: A review of the current literature.
Cazzaniga G, et al. Am J Dent 2015 - Review. PMID 26846036
PURPOSE: To evaluate the state of art on the relations between surface properties (surface roughness, topography, surface free energy and chemistry) of resin-based composite materials and microbial adhesion and biofilm formation. ...RESULTS: Surface properties of resin-based composite materials as well as surface treatments can strongly affect bacterial adhesion and biofilm formation, although the "ideal" surface features have not been identified yet. ...
PURPOSE: To evaluate the state of art on the relations between surface properties (surface roughness, topography, su
Treatment techniques on biocompatible titanium to modify the surface wetting properties.
Torrisi L and Scolaro C. Biomed Mater Eng 2017. PMID 28869433
The titanium surface wetting can be modified drastically depending on the used treatment to enhance the hydrophilic or the hydrophobic behaviour of the metallic biocompatible surface. ...Possible applications to permanent or removable prosthesis titanium based are presented and discussed....
The titanium surface wetting can be modified drastically depending on the used treatment to enhance the hydrophilic or the hydrophobi …
The Effect of Ytterbium-Doped Fiber Laser with Different Parameters on Physical Properties of Zirconia Surface.
Mutluay Unal S, et al. Photomed Laser Surg 2017. PMID 27860552
Surface roughness values were measured with a noncontact profilometer, and the mean Ra values were calculated. Wettability was measured with a goniometer. ...CONCLUSIONS: YbPL irradiation was effective at roughening the zirconia surface. Although laser treatment affected zirconia surfaces and provided surface roughness, the power and frequency should be adjusted to achieve optimum results....
Surface roughness values were measured with a noncontact profilometer, and the mean Ra values were calculated. Wettability was
Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel.
Zhang P, et al. J Vis Exp 2018. PMID 29658930 Free PMC article.
A lubricant layer on the slippery surface can act as a barrier between the repelled materials and the surface structure. However, the slippery surfaces in previous studies rarely showed high-temperature resistance. ...By functionalizing the surface with saline, a slippery surface was prepared by adding silicone oil. The prepared slippery surface maintained the anti-wetting property for water, even when the surface was heated to 300 °C. ...
A lubricant layer on the slippery surface can act as a barrier between the repelled materials and the surface structure. Howev …
Surface-wetting characterization using contact-angle measurements.
Huhtamäki T, et al. Nat Protoc 2018. PMID 29988109
Wetting, the process of water interacting with a surface, is critical in our everyday lives and in many biological and technological systems. ...This protocol focuses on using water as a probe liquid, and advice is given on how it can be modified for the use of other probe liquids....
Wetting, the process of water interacting with a surface, is critical in our everyday lives and in many biological and technol …
Multiple-peak and single-peak dental curing lights comparison on the wear resistance of bulk-fill composites
Sahadi BO, et al. Braz Oral Res 2018. Among authors: Price RB. PMID 30569972 Free article.
After 30,000 reciprocal strokes in a toothbrushing machine, the roughness profile, surface roughness, surface morphology, and microhardness were examined. ...The highest surface roughness and roughness profile values were found in SDR after toothbrushing, for both light-curing units tested. ...
After 30,000 reciprocal strokes in a toothbrushing machine, the roughness profile, surface roughness, surface morpholog …
Fabrication, surface properties, and origin of superoleophobicity for a model textured surface.
Zhao H, et al. Langmuir 2011. PMID 21486088
Inspired by the superhydrophobic effect displayed in nature, we set out to mimic the interplay between the chemistry and physics in the lotus leaf to see if the same design principle can be applied to control wetting and adhesion between toners and inks on various printing surfaces. ...The result suggests that the wavy structure at the top of each pillar is the main geometrical contributor to the superoleophobic property observed in the model surface....
Inspired by the superhydrophobic effect displayed in nature, we set out to mimic the interplay between the chemistry and physics in the lotu …
Perspectives on Mussel-Inspired Wet Adhesion
Ahn BK. J Am Chem Soc 2017 - Review. PMID 28657746
Nature employs sophisticated control of a structure's properties at multiple length scales to achieve its wet adhesion. However, the translation of such structures has very often been missing in biomimetic adhesives; in turn, their performance is significantly limited as compared to that of biological adhesion, e.g., from mussels. ...
Nature employs sophisticated control of a structure's properties at multiple length scales to achieve its wet adhesion. However, the …
Objective measurements of skin surface roughness after microdermabrasion treatment.
Zapletalova A, et al. Skin Res Technol 2017. PMID 28083897
BACKGROUND: The aim of this article is to present a new methodology for assessment of skin topology using a three-dimensional image (3D). ...The output may also include also an enlarged model of the skin surface made by 3D printer, which can serve for illustrative communication with the client....
BACKGROUND: The aim of this article is to present a new methodology for assessment of skin topology using a three-dimensional image ( …
126,759 results
Jump to page
Feedback