A computer model of the position of the combined component in the prevention of impingement in total hip replacement

J Bone Joint Surg Br. 2007 Jun;89(6):839-45. doi: 10.1302/0301-620X.89B6.18644.

Abstract

Dislocation remains a major concern after total hip replacement, and is often attributed to malposition of the components. The optimum position for placement of the components remains uncertain. We have attempted to identify a relatively safe zone in which movement of the hip will occur without impingement, even if one component is positioned incorrectly. A three-dimensional computer model was designed to simulate impingement and used to examine 125 combinations of positioning of the components in order to allow maximum movement without impingement. Increase in acetabular and/or femoral anteversion allowed greater internal rotation before impingement occurred, but decreases the amount of external rotation. A decrease in abduction of the acetabular components increased internal rotation while decreasing external rotation. Although some correction for malposition was allowable on the opposite side of the joint, extreme degrees could not be corrected because of bony impingement. We introduce the concept of combined component position, in which anteversion and abduction of the acetabular component, along with femoral anteversion, are all defined as critical elements for stability.

Publication types

  • Evaluation Study

MeSH terms

  • Arthroplasty, Replacement, Hip* / methods
  • Computer Simulation*
  • Hip Dislocation / physiopathology
  • Hip Dislocation / prevention & control*
  • Humans
  • Joint Instability / physiopathology
  • Joint Instability / prevention & control*
  • Models, Anatomic*
  • Range of Motion, Articular
  • Rotation