The effect of temperature and heating rate on char properties obtained from solar pyrolysis of beech wood

Bioresour Technol. 2015 Apr:182:114-119. doi: 10.1016/j.biortech.2015.01.112. Epub 2015 Feb 4.

Abstract

Char samples were produced from pyrolysis in a lab-scale solar reactor. The pyrolysis of beech wood was carried out at temperatures ranging from 600 to 2000°C, with heating rates from 5 to 450°C/s. CHNS, scanning electron microscopy analysis, X-ray diffractometry, Brunauer-Emmett-Teller adsorption were employed to investigate the effect of temperature and heating rate on char composition and structure. The results indicated that char structure was more and more ordered with temperature increase and heating rate decrease (higher than 50°C/s). The surface area and pore volume firstly increased with temperature and reached maximum at 1200°C then reduced significantly at 2000°C. Besides, they firstly increased with heating rate and then decreased slightly at heating rate of 450°C/s when final temperature was no lower than 1200°C. Char reactivity measured by TGA analysis was found to correlate with the evolution of char surface area and pore volume with temperature and heating rate.

Keywords: Beech wood; Char structure; Combined effect; Reactivity; Solar pyrolysis.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Charcoal / chemistry*
  • Equipment Design
  • Fagus / chemistry
  • Heating
  • Hot Temperature
  • Microscopy, Electron, Scanning
  • Technology / instrumentation
  • Technology / methods
  • Wood / chemistry*
  • X-Ray Diffraction

Substances

  • biochar
  • Charcoal