In this study, we proposed an advanced oxidation process of pyrite (FeS2) and peroxymonosulfate (PMS) and prepared a modified polyaluminum chloride biochar (P-BC). The motivation is to use the combination of FeS2 + PMS + P-BC to improve waste activated sludge (WAS) dewaterability. The method to improve the sludge dewatering effect with the combination of FeS2 + PMS + P-BC is as follows: in the first step, pour 0.75 g/g TSS FeS2 and 0.6 g/g TSS PMS into the sludge, and stir for 15 min. Then, add P-BC and stir for 5 min; complete the entire WAS processing process. The vacuum filtration test was used to evaluate the dehydration effect. The water content (Wc) and specific resistance to filtration (SRF) of the raw sludge can be reduced from the original values of 92% and 2.36 × 1013 m/kg to 67% and 9.89 × 1011 m/kg, respectively. The results showed that the combination of FeS2 + PMS + P-BC can effectively improve the sludge dewatering effect through oxidation. A laser particle size analyzer is used to observe changes in sludge particle size. The median diameter of sludge particles increased from 55.37 to 64.56 μm. A zeta analyzer to is used observe changes in sludge zeta potential. The zeta potential of sludge particles increased from - 15.8 to 0.4 mV. In the analysis of extracellular polymeric substances (EPS) of sludge, it was found that protein (PN) and polysaccharide (PS) in EPS decreased significantly. To further analyze the phenomenon of PN and PS drop, excitation-emission-matrix spectra (3D-EEM) was used. To observe the changes of sludge functional group, X-ray photoelectron spectroscopy was used. It was found that FeS2 + PMS + P-BC can destroy the functional groups of sludge, such as O-H, C-C, and O═C-NH- related to proteins and polysaccharides.
Keywords: FeS2/PMS oxidation; Hydrophobic; Modified biochar; Re-flocculation; Sludge dewatering.
© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.